Home > News > Yatai Rubber Hose Standard Catalogue

Yatai Rubber Hose Standard Catalogue

Sep. 29, 2019

I. International Standards

ISO 1307 Rubber and Plastic Hose-Hose Specification, Minimum and Maximum Inner Diameter and Tolerance of Hose Cutting Length

ISO 2928 Rubber hoses and hose assemblies for transporting liquid or gaseous liquefied petroleum gas (LPG) and natural gas under 25 bar (2.5 MPa) - Specification

ISO 3949 Plastic hoses and hose assemblies for fabric reinforced hydraulic applications - Specification

ISO 4641 Rubber hoses and hose assemblies for water absorption and drainage

ISO 4671 Rubber and Plastic Hose and Hose Assemblies - Measurement of Hose Size and Hose Assemblies Length

ISO 5771 Rubber hoses and hose assemblies for transporting anhydrous ammonia - Specification

ISO 5981 Rubber or Plastic Coated Fabrics - Determination of Shear Flexure and Friction Resistance

ISO 6134 Rubber hoses and hose assemblies for saturated steam - Specification

ISO 6224 General Textile Reinforced Thermoplastic Drainage Hose - Specification

ISO 6450 Rubber or Plastic Coated Fabrics - Determination of Liquid Resistance

ISO 6802 Steel Wire Reinforced Rubber and Plastic Hose and Hose Assembly-Hydraulic Pulse Test with Flexibility

ISO 8029 Plastic Hose - General Purpose Fabric Reinforced Foldable Hose for Water Transfer - Specification

ISO 8033 Rubber and Plastic Hose-Determination of Interlaminar Adhesion Strength

ISO 8308 Rubber and Plastic Hose and Non-reinforced Hose-Liquid Wall Permeability Measurement

ISO 28017 Rubber hoses and hose assemblies for wire or textile reinforced Dredging - Specification

ISO 1436 Hydraulic Rubber Hose and Hose Assembly for Wire Braided Reinforced Oil-based or Water-based Fluids - Specification

ISO 3862 Rubber hoses and hose assemblies for oil-based or water-based fluids with steel wire wound reinforced hydraulic rubber coatings - Specification

ISO 3302-1:1996 Tolerances for Rubber Products Part 1: Dimensional Tolerances

ISO 1402:2009 Rubber and plastic hoses and hose assemblies - Hydrostatic Test Method

ISO 1825:2010 Aircraft Ground Fueling and Drainage Rubber Pipe and Rubber Pipe Components - Specification

ISO 4023:2009 Steam Rubber Pipe and Rubber Pipe Assembly - Test Method

ISO 4080:2009 Rubber and plastic hoses and hose assemblies - Determination of air permeability

ISO 8301:2010 Thermal Insulation-Steady State Thermal Transformer Resistance and Related Performance Determination-Thermometer Method

ISO2929:2014 Oil Tank Truck Rubber Hose and Hose Assembly for Fuel Transportation

IS023297:2008 Specification for Hydraulic Steel Wire or Composite Cord Reinforced Single Pressure Thermoplastic Hose and Hose Assembly

ISO 4079:2015 Specification for Fabric Enhanced Hydraulic Types Applicable to Oil-based or Water-based Fluids for Rubber Hose and Hose Assemblies

ISO 27126:2014 Specification for Multilayer Thermoplastic (Non-sulfurized) Hose and Hose Assembly for Transport of Hydrocarbons, Solvents and Chemicals

ISO 16019-1:2011 Measurement of flexibility and stiffness of rubber and plastic hoses and non-reinforced hoses

ISO 16019-2:2011 Measurement of flexibility and stiffness of rubber and plastic hoses and non-reinforced hoses

ISO 16019-3:2011 Measurement of flexibility and stiffness of rubber and plastic hoses and non-reinforced hoses

ISO 4023:2012 Test Method for Steam Rubber Tube and Tube Assembly

ISO 7233:2006 (E) Rubber and plastic pipes and hose assemblies - Vacuum resistance test.

ISO/DIS 28017-2010 Steel wire or textile reinforced hose and hose assemblies for dredging-Specification

II. European Standards

Rubber and plastic hoses and hose assemblies for EN 1360 metering fuel distribution systems - Specification

EN 13483:2013 Specification for rubber and plastic hoses and hose assemblies for metering and distributing fuel systems with internal oil and gas recovery functions

III. British Standards

BS EN ISO 1825:2011 Aircraft Ground Fueling and Drainage Rubber Pipe and Rubber Pipe Assembly

IV. American Standards

ASTM Standards

ASTM D 378-00 (confirmed in 2008)

ASTM D 380-94 (confirmed in 2006)

ASTM D 3902-90 (confirmed in 2004)

Standard Test Method for ASTM D 1329 Evaluation of Rubber Properties-Low Temperature Retraction Method (TR Test)

Tests of synthetic plasticizers for ASTM D 1992 rubber.

ASTM D 5009 Test Method for Rubber Processing Performance Using Capillary Rheometer

ASTM D 5289 Test Method for Rubber Vulcanization Characteristics Using Rotor-Free Vulcanizer

Standard test method for ASTM D 6049 evaluation of rubber properties

ASTM D2000-08 Automotive Rubber Product Classification System Standard

Standard Test Method for ASTM D 1329-16 Evaluation of Rubber Properties-Low Temperature Retraction Method (TR Test)

Tests of synthetic plasticizers for ASTM D 1992-O6 rubber

American Association of Automobile Engineers Standards

SAE J 517 hydraulic hose

SAE J 343-2012 SAE 100R series hydraulic hose and hose assembly test and test procedures

SAE J 516-2005 (R) Hydraulic Pipe Fittings

SAE J 1402-2005 Automotive Air Brake Rubber Pipe and Rubber Pipe Assembly

SAE J 517:2013-02 Hydraulic Hose

American Rubber Standard

American Rubber Manufacturers Association Standards

Guidelines for the Use, Maintenance and Inspection of IP-11-5 Welding Hose (Oxyacetylene)

IP-11-7 Technical Specification Handbook for Maintenance, Testing and Inspection of Small Diameter Rubber Tubes

Maintenance, Test and Inspection Manual for Pipe and Hose Components of Gasoline Tanker in IP-11-8 Gas Station

V. Japanese Standards

JIS K 6343:2004 Rubber hose for oil delivery

JIS K 6346:1999 Rubber hose for oil absorption

JIS K 6351:2006 Gas Fuel Reinforced Rubber Pipe and Rubber Pipe Assembly

VI. China's National Standards

Fabric reinforced rubber hose for compressed air GB/T 1186-2007

Specification for Steel Wire Braided Reinforced Hydraulic Types for Oil-based or Water-based Fluids Applicable to Rubber Hose and Hose Assemblies GB/T 3683-2011

GB/T 3733-2008 card sleeve end through pipe joint

Technical Specifications for GB/T 3765-2008 Card Sleeve Pipe Joints

Hose Joints for Welding, Cutting and Related Process Equipment of Gas Welding Equipment GB/T 5107-2008

GB/T 5625-2008 Expanded End-to-End Connector

Brake hose assemblies for hydraulic brake systems of road vehicles using non-petroleum brake fluid GB/T 7127.1-2000

Brake hose assemblies for hydraulic braking system of road vehicles using petroleum-based brake fluid GB/T 7127.2-2000

Automotive air brake hose and hose assemblies GB/T 7128-2008

Rubber hoses for braking of railway locomotives and rolling stock GB/T 7542-2003

Hydraulic hose joints GB/T 9065.2-2010 Part 2: hose joints with 24 degree taper sealing end

Hydraulic hose joint dimensions welded or fast-changing

GB/T 9065.5-2010 Hydraulic hose joints Part 5: 37 degree flared end hose joints

Internal Diameter Dimensions and Tolerances and Length Tolerances of Industrial General Rubber and Plastic Hose GB/T 9575-2003

Guidelines for selection, storage, use and maintenance of rubber and plastic hoses and hose assemblies GB/T 9576-2001

GB/T 9577-2001 Rules for Marking, Packaging and Transportation of Rubber and Plastic Hose and Hose Assemblies

Rubber hoses and hose assemblies for ground refueling and drainage of aircraft GB/T 10543-2003

Hydraulic rubber hoses and hose assemblies for steel wire wound reinforced rubber coatings GB/T 10544-2003

Rubber hoses and hose assemblies for bulk transportation of liquefied petroleum gas (LPG)

Steel wire for rubber hose reinforcement GB/T 11182-2006

Steel wire rope for rubber hose GB/T 12756-1991

GB/T 14171-1993 Automobile Pneumatic Brake System Pipeline Thread Hole and Outer Thread of Pipe Joint

GB/T 15329.1-2003 Rubber hoses and hose assemblies Fabric reinforced hydraulic type Part 1: Oil-based fluids

GB/T 15908-2009 Hydraulic Fabric Reinforcement Specification for Plastic Hose and Hose Assembly

Structure, Performance Requirements and Test Method of GB/T 16897-2010 Brake Hose

Corrugated metal hoses for explosive environmental protection cables

GB/T 18947-2003 Hydraulic hose and hose assemblies reinforced with steel wire for mining

Specification for Rubber Hose and Pure Rubber Hose for Cooling System of Internal Combustion Engine GB/T 18948-2009

Fabric reinforced rubber hoses and hose assemblies for conveying air and water in mines

Refrigerant 134a for rubber and plastic hoses and hose assemblies for automotive air conditioning

Rubber hoses and hose assemblies of liquefied petroleum gas for motor vehicles GB/T 20414-2006

Specification for rubber hoses and hose assemblies for automotive power steering systems GB/T 20461-2006

Thermoplastic non-reinforced hoses and hoses for automobiles GB/T 20462.1-2006 Part 1: Non-fuel

Thermoplastic non-reinforced hoses and hoses for automobiles GB/T 20462.2-2006 Part 2: Oil-based fuel

Specification for rubber hoses and hose assemblies for distribution of liquefied petroleum gas (LPGs)

Aluminum and aluminium alloy foil for hoses GB/T 22648-2008

Requirements, design and installation of hoses, isolators and expansion joints for refrigeration systems and heat pumps

GB/T 24126-2009 Guidelines for the Use of Rubber and Plastic Hose and Hose Assemblies by Purchasers, Assemblers, Installers and Operators

Specification for Rubber Hose and Pure Rubber Tube for Air and Vacuum Systems of Internal Combustion Engines GB/T 24140-2009

GB/T 24141.1-2009 Specification for Rubber Hoses and Pure Rubber Hoses for Fuel Pipelines of Internal Combustion Engines  Diesel Fuels

GB/T 24141.2-2009 Specification for Rubber Hoses and Pure Rubber Hoses for Fuel Pipelines of Internal Combustion Engines

VII. Chemical Industry Standards

HG/T 2184-2008 General Water Transfer Fabric Reinforced Rubber Hose

HG/T 2192-2008 Rubber Hose for Sandblasting - Specification

HG/T 2193-2008 Specification for Intake Hose for Rubber Hose and Hose Assembly of Washing Machine and Dishwasher

HG/T 2301-2008 Fabric reinforced thermoplastic hoses for compressed air

HG/T 2491-2009 Water Conveying Rubber Hose and Pure Rubber Hose for Automobile

HG/T 2540-1993 (2009) Rubber hose for locomotive oil

HG/T 2718-1995 (2009) Rubber and plastic hoses and hose assemblies for automotive air conditioning

HG/T 3035-1999 Rubber hoses for water absorption and drainage

Specification for rubber hoses and hose assemblies for saturated steam

HG/T 3037-2008 Measurement and distribution of rubber and plastic hoses and hose assemblies for fuel

HG/T 3039-2008 Rubber Hose for Ship/Wharf Oil Transportation

HG/T 3041-2009 Rubber hose and hose assemblies for tanker fuel delivery

HG/T 3042-1989 (2009) Rubber hose and pure rubber hose for conveying conventional liquid fuel in fuel system of internal combustion engine (original GB10542-1989)

HG/T 3045-2008 Spiral Reinforced Thermoplastic Hose for Drainage and Suction

HG/T 3665-2000 (2009) Pure rubber hose and rubber hose for oxygen-containing fuel delivery in internal combustion engine fuel system

HG/T 3666-2000 (2009) Pure rubber hose and rubber hose for conveying oxidized fuel in fuel system of internal combustion engine

VII. Machinery Industry Standards

JB/T 6142.1-2007 Conical Sealed Steel Wire Braided Rubber Tube Assembly

JB/T 6142.2-2007 Cone Sealed 90 Degree Steel Wire Braided Rubber Tube Assembly

JB/T 6142.3-2007 Cone Sealed Double 90 Degree Steel Wire Braided Rubber Tube Assembly

JB/T 6142.4-2007 Cone Sealed 45 Degree Steel Wire Braided Rubber Tube Assembly

JB/T 6143.1-2007 Conical Sealed Cotton Yarn Braided Rubber Tube Assembly

JB/T 6143.2-2007 Cone Sealed 90 Degree Cotton Yarn Braided Rubber Tube Assembly

JB/T 6143.3-2007 Conical Sealed Double 90 Degree Cotton Yarn Braided Rubber Tube Assembly

JB/T 6143.4-2007 Conical Sealed 45 degree Cotton Yarn Braided Rubber Tube Assembly

JB/T 6015-2000 Technical Specifications for Low Pressure Oil Delivery Rubber Tube Components of Diesel Engines

JB/T 8406-2008 Construction Machinery High Temperature and Low Pressure Oil Pipe

JB/T 8727-2004 Hydraulic hose assembly

JB/T 10637-2006 High Temperature and Low Pressure Oil Pipe for Agricultural and Forestry Tractors and Machinery

JB/T 10759-2007 High Temperature and High Pressure Hydraulic Hose Assembly for Construction Machinery

JB/T 6144.1-2007 Conical Joints for Conical Sealant Tube Assembly

JB/T 6144.2-2007 Conical Sealing Rubber Tube Assembly 55 Degree Unsealed Tube Threaded Taper Joint

JB/T 6144.3-2007 Conical Sealing Rubber Tube Assembly 55 Degree Threaded Conical Joints for Sealing Tubes

JB/T 6144.4-2007 Conical Sealant Tube Assembly 60 Degree Threaded Conical Joints for Sealed Tubes

JB/T 6144.5-2007 Conical Sealant Tube Assembly Welded Conical Joints

ContactPenny Zhu

Phone NO+86 1833107383Wechat & whats app

QQ: 2763360390

Email: penny@chnhose.com


hot Products
Contact Us
  • Tel: +86 156 0318 1870
  • E-mail: amy@chnhose.com
  • Add: NO.888 Qingliangdian IZ,Hengshui City,China
Fllow Us

Copyright © Proleader Group Co., Ltd. All Rights Reserved Technical Support:

Amy
alana
Sophie
Ivan
penny
Alice