KMSG-91 series hose crimpers are our new products. Facing the problem that it’ s inconvenient to add the lubricating oil on the annular machine,our technicians add the self–filling oil cup, in which can fill oil automatically. Considering the phenomenon that the hose crimpers are always use for crimping the non-standard bend. We add the large opening and passing ability. Moreover, we know that if the zinc on the working surface to lose, the working surface and cylinder will be damaged. However, our machine can avoid this problem. There are two reasons.(1) we add the oil groove on the die base.(2)we add the base-protective resin gasket between the die bases. The new bracket for machine completely change the drawback that we must connect the machine and bracket by weld.
|8||Capacity of tank||65L|
|10||Crimper range||φ6—φ51Ⅵ(φ64 Ⅳ)|
|12||Opening without dies||125mm|
Back resetting hydro-cylinder,can be easily operated.
Increasing the opening,and good passing performance.
Added with base-protective resin gasket to not
damage the working surface.
Function:manual\semi-automatic and automatic.